This master applies to '88 through 94, all models, by Honda part numbers, surely fits thereafter as well, with the later models having a slightly darker finish. It is excellent throughout. Dis-assembled, cleaned, checked as to each part. The bore is excellent, as are the seals and plunger, and the bushing in the lever. The only thing that must be replaced is the dust seal (45504-410-003): it was dried and cracking, and personally I'd replace the lever bush 22885-MB0-006. It shows wear, usable but may as well bring it right up to snuff. Re-assembled, pressure tested, lubed properly to preserve it, and it ready to place (flush well when placing.) This rarely fine piece is no longer available at Honda. With the inclusions (lever, swivel, push-rod, chrome helmet holder, etc): this was a $270 item at Honda.