GL 1200A Front left caliper, disassembled, bore cleaned and checked, lightly honed to smooth the walls. Seal-grooves cleaned and checked, all else: pad-pins, pad spring , air bleeder cleaned and checked, reassembled, two good seals installed. Required: dust seals, pistons (43107-MA7-006, or K&L #32-1174) Pads are at about 50% and are good, coming long for the ride. This is mechanically a decent caliper that could use a coat of caliper paint (from any decent automotive supply). I believe this will work on the rear of GL1200 models (all) as well, but do your research.
MADE IN THE USA
MADE IN THE USA
THERE ARE NO TARRIFS ON THIS ITEM.

