GL 1200A Front left caliper, disassembled, bore cleaned and checked, up to spec, lightly honed. Seal-grooves cleaned and checked, all else: pivot and sleeve, grommets, pad-pins, pad spring , air bleeder cleaned and checked, reassembled, two good main seals and one dust seal installed. Required: pistons, 1 dust seal, place it, flush it, ride it. Pads installed are at about 50%, coming along for the ride, there's about 15k miles of normal driving left on them. This is mechanically and esthetically an excellent caliper. Any mars in the bores are stains only.
MADE IN THE USA
MADE IN THE USA
THERE ARE NO TARRIFS ON THIS ITEM.