Complete brake master assembly, disassembled, cleaned and checked (except the master interior, it needed nothing: the pic shows it as it came off the bike, clean and well maintained. Included are the lever, adjuster, pivot-bushing, lever-pin with nut, brake switch and cruise switch: all in good operating condtion: an additional $100+ worth of items, total about $245 new. The master is excellent all round. The, pin, bushing, and lever are good. The dust boot exterior (only) is cracked, the inside is good, and will be for quite a while. (If you wish to replace it it is $9 at Honda, part number 45504-410-003, but it doesn't need it.) The pivot and rod are greased. Add your cap and bar-clamp, and this is a pop 'n drop assembly. Don't change the lubricant in it, it is the best you can use for the purpose.
MADE IN THE USA
MADE IN THE USA
THERE ARE NO TARRIFS ON THIS ITEM.