Front Right brake caliper (25mm pistons) assembly complete with pivot pin. It has been disassembled, bore cleaned and checked, lightly honed to smooth the walls. Seal-grooves cleaned and checked, all else: pad-pins, pad spring, air bleeder cleaned and checked, reassembled, two new dust seals installed, pivot pi removed, cleaned, lubricated. Required: nothing.This is mechanically a decent caliper that could use a coat of caliper paint (from any decent automotive supply). This caliper from a 1983 Aspencade, Interstate, fits one year: 1983 Interstate or Standard ONLY. This is a pop n' drop assembly. Pads are at about 85%, clean and good. Pivot pin threads are good. were you to rebuild a caliper, with new pistons, seals, a good bore, pads, labor and supply, it would cost about $180 more than this assembly.
MADE IN THE USA
MADE IN THE USA
THERE ARE NO TARRIFS ON THIS ITEM.