Front LEFT brake caliper (32mm pistons) assembly complete with pivot pin. It has been disassembled, bore cleaned and checked, lightly honed to smooth the walls. Seal-grooves cleaned and checked, all else: pad-pins, pad spring, air bleeder cleaned and checked, reassembled, pivot pin removed, cleaned, lubricated. Required: 1 dust boot for the pivot pin, only. the main and dust seals are recent replacements, and are good. This is mechanically a decent caliper that could use a coat of caliper paint (from any decent automotive supply). This caliper from a 1983 Aspencade, Interstate, fits one year: 1983 Interstate or Standard ONLY. This is a pop n' drop assembly, needing the $1.50 boot. Pads are at about 40% (about 15K miles, average), clean and good. Pivot pin threads are good. Were you to rebuild a caliper, with new pistons, seals, a good bore, pads, labor and supply, it would cost about $180 more than this assembly.
MADE IN THE USA
MADE IN THE USA
THERE ARE NO TARRIFS ON THIS ITEM.
GL1000 GL1100 GL1200 Vintage parts Used and New
