Home :: GL1000 GL1100 GL1200 Vintage parts Used and New :: GL1100 1980 to 1983 Vintage parts :: Goldwing GL1100 1983 Front Right Brake Caliper GL or GLI 45200-MB9-781
Printable version

Goldwing GL1100 1983 Front Right Brake Caliper GL or GLI 45200-MB9-781

Goldwing GL1100 1983 Front Right Brake Caliper GL or GLI 45200-MB9-781
SKU
SW6542 {Cal1}
Quantity in stock
1 item(s) available
Weight
1.20 kg
Our price:
CAD$ 150.75
Click here to be notified of price drops of this item
 
Quantity (1 available)
Click here to be notified when this item is nearly out of stock
Front Right brake caliper (25mm pistons) assembly complete with pivot pin. It has been disassembled, bore cleaned and checked, lightly honed to smooth the walls. Seal-grooves cleaned and checked, all else: pad-pins, pad spring, air bleeder cleaned and checked, reassembled, two new dust seals installed, pivot pi removed, cleaned, lubricated. Required: nothing.This is mechanically a decent caliper that could use a coat of caliper paint (from any decent automotive supply). This caliper from a 1983 Aspencade, Interstate, fits one year: 1983 Interstate or Standard ONLY. This is a pop n' drop assembly. Pads are at about 85%, clean and good. Pivot pin threads are good. were you to rebuild a caliper, with new pistons, seals, a good bore, pads, labor and supply, it would cost about $180 more than this assembly.

MADE IN THE USA

THERE ARE NO TARRIFS ON THIS ITEM.

: *
: *
: *
Type the characters you see in the picture:


*
The code is case-sensitive and must be entered exactly as above.